Building Society Sort Code: How to Find the Right One

UK Building Society Banking & Payment Details Guide

Building Society Sort Code: How to Find the Right One

Need a building society sort code to receive a bank transfer, pay into your savings, set up a standing order or complete a payment form? The correct number depends on which building society holds the account and what type of account you are paying.

Some accounts have their own sort code and eight-digit account number. Others require a specific payment sort code, an account number used by the receiving institution and a separate building society roll number or payment reference. Entering the wrong combination can delay the money or send it to the wrong place.

Quick answer: A UK sort code has six digits, usually written as three pairs, such as 12-34-56. There is no single sort code for all building societies. Find the payment instructions for your specific account from its official app, online banking, statement or provider website. If a roll or reference number is required, enter it exactly as instructed.

Independent UK guide reviewed: 24 October 2026. The society-specific payment details below reflect published official guidance and should be checked again before sending money, particularly for older or specialist accounts.

Building Society Sort Code: Quick Facts

Sort code lengthSix digits, normally displayed as XX-XX-XX.
Standard account numberUsually eight digits for UK bank transfers, although a building society’s own account identifier may be longer.
Roll numberAn additional savings or mortgage account identifier used by some building societies.
Payment referenceMay need to contain the full building society roll or account number.
Where to find itOfficial app, online banking, statement, account documents or the provider’s paying-in instructions.
When it mattersFaster Payments, Bacs transfers, standing orders, CHAPS payments and some other domestic payment instructions.
International paymentAn IBAN, BIC/SWIFT and other instructions may be required instead of relying on UK sort-code details alone.
Safety checkVerify the account-holder name, sort code, account number and any mandatory reference before confirming a transfer.
Important: do not copy a building society’s general sort code from an online list without checking the account type. For example, Leeds Building Society publishes different payment sort codes for savings and mortgage payments.

What Is a Building Society Sort Code?

A sort code is a six-digit identifier used within the UK banking system to route domestic payments to the correct financial institution and payment arrangements. Banks and building societies use sort codes together with account numbers to identify where money should be sent.

The format normally looks like this:

12
First pair
34
Second pair
56
Third pair

Format example only: 12-34-56 is used here to explain the structure. It is not a payment instruction.

Why the building society account number may be different

Some building societies use a longer internal savings account number or roll number. When you make a payment from another bank, you may need to enter an eight-digit account number and then put the longer identifier in the reference field.

Other accounts, including many Nationwide current accounts and savings accounts, have a directly usable six-digit sort code and eight-digit account number.

Sort code

  • Six digits.
  • Used for domestic payment routing.
  • May differ by product or payment service.
  • Not necessarily unique to one customer.

Account number or roll number

  • Identifies the account or recipient.
  • An eight-digit number may be used in the payment form.
  • A separate reference may be essential.
  • Must match the provider’s instructions.

How to Find Your Building Society Sort Code

The safest method is to use information supplied directly by the provider holding your account. If you have several savings products, check the details for the exact account you want to receive the payment.

Banking app

Log in, select the account and look for account details, payment details or the account information menu.

Online banking

Select the relevant savings or current account and check for a sort code, account number and reference instructions.

Statements

Many current-account and savings statements display the information needed to identify the account.

Passbook

Some traditional savings accounts use a passbook containing the account or roll number. Do not assume that printed number is itself the transfer sort code.

Welcome documents

Account-opening letters or secure messages may explain how money should be paid in.

Official payment page

The provider’s paying-in instructions can be particularly important where shared receiving-account details are used.

Follow these steps

  1. Identify the exact building society and account name.
  2. Open its official app or website, or read the latest account statement.
  3. Find the section describing incoming payments.
  4. Record the required payee name, sort code and eight-digit payment account number.
  5. Check whether a separate roll number or reference must also be entered.
  6. Confirm that the account currently accepts deposits.
  7. Compare all details with the bank transfer form before authorising the payment.
Do not confuse an account identifier with a payment instruction. A ten-digit savings account number may be used partly as an eight-digit payment account number and partly as a reference, depending on the provider. Follow the exact instructions rather than removing digits yourself.

Building Society Sort Codes: Official UK Payment Examples

The following examples come from the building societies’ published paying-in guidance. They demonstrate why identifying the product and reference field matters just as much as knowing the sort code.

Before sending money: these are examples of currently published payment arrangements, not a universal or permanent directory. Always re-check your specific product’s instructions and the payee details displayed by the receiving institution.
Building society
Published payment sort code
Important instruction
Yorkshire Building Society
60-92-04 for the published incoming-payment route.
Uses the first eight digits of the YBS account number as the payment account number and the full ten-digit number as the reference or roll number.
Coventry Building Society
40-63-01 for the published Online Services paying-in instructions.
Use the last eight digits of your account number, with your full name as payee, following Coventry’s instructions.
Skipton Building Society
20-78-91 for its published savings payment route.
Uses payment account number 70798924 and your own nine-digit Skipton savings account number as the reference.
Leeds Building Society — savings
08-61-19 for the published savings payment route.
Use the first eight digits of the relevant ten-digit Leeds account number and follow the required reference instructions.
Leeds Building Society — mortgage
40-64-38 for mortgage payments.
This is different from the savings payment sort code. Verify your mortgage account and reference instructions.
Nationwide Building Society
Account-specific for normal current and many savings accounts.
Find the six-digit sort code and eight-digit account number in Nationwide’s app, Internet Bank or your statement.

1. Yorkshire Building Society Sort Code

Yorkshire Building Society publishes 60-92-04 for its relevant incoming savings payments. It says this payment route operates through NatWest Bank plc.

The bank transfer needs the account holder’s name, the specified sort code, the first eight digits of the YBS account number and the full ten-digit YBS account number as the reference or roll number.

YBS payment format

Sort code
60-92-04
Account number
First eight digits of your ten-digit YBS account number
Reference
Full ten-digit YBS account number
Payee
The YBS account holder’s name
YBS reference warning: do not substitute a casual payment description such as “savings” for a required roll number. That reference helps YBS identify the destination account.

2. Coventry Building Society Sort Code

Coventry Building Society’s current Online Services guidance publishes 40-63-01 for eligible savings payments. It instructs customers to use the last eight digits of their account number.

Coventry published paying-in format

Sort code
40-63-01
Payee name
Your full name
Account number
Last eight digits of your Coventry account number
Reference
The payment reason, name or other reference permitted by the instructions

3. Skipton Building Society Sort Code

Skipton Building Society publishes 20-78-91 and payment account number 70798924 for its standard UK savings paying-in instructions.

Customers must supply their own nine-digit Skipton savings account number as the payment reference. That reference is essential to identifying which customer’s savings account should receive the money.

Skipton published savings payment format

Sort code
20-78-91
Account number
70798924
Reference
Your own nine-digit Skipton savings account number
Account holder
Your full name, following Skipton’s instructions

4. Leeds Building Society Sort Codes

Leeds Building Society provides a particularly useful example of why account purpose matters. Its official instructions specify different sort codes for incoming savings payments and mortgage payments.

08-61-19 Savings payment sort code in the published instructions.
40-64-38 Mortgage payment sort code in the published instructions.

Leeds also instructs customers to use the first eight digits of their current ten-digit account number as the payment account number. Follow its current reference instructions as well.

Leeds warning: do not pay a mortgage using the savings sort code or vice versa. Even when both belong to the same building society, the payment destination and processing instructions may differ.

5. Nationwide Building Society Sort Code

Nationwide normally supplies a six-digit sort code and eight-digit account number directly for its current accounts and many personal savings accounts.

Rather than using a single Nationwide sort code from an online directory, check the actual account. Nationwide says customers can find account details in its banking app, Internet Bank, letters, emails and statements, depending on the product.

Current accountCheck the app, Internet Bank, debit card or current-account statement.
Personal savingsFind the sort code and account number in the app, Internet Bank or savings documents.
MortgageNationwide publishes a separate payment route using the mortgage account number as the reference.
Business savingsSeparate receiving-account and reference instructions can apply.
Nationwide savings tip: Nationwide’s published savings guidance says many accounts can receive deposits using their own eight-digit account number and six-digit sort code. Do not assume a shared building society account number or separate roll number is required for every Nationwide savings product.

Building Society Sort Code vs Roll Number: What’s the Difference?

A roll number is an additional identifier used by some building societies, particularly for savings or mortgage accounts. It tells the receiving institution which member or account should be credited when the payment arrangement requires that extra information.

The sort code routes the payment. The payment account number identifies the receiving banking arrangement. The roll number or reference may then identify the final customer’s building society account.

Detail
What it does
Typical location in the transfer form
Sort code
Identifies the UK payment-routing destination.
Sort code field.
Account number
Identifies the receiving bank account or provider-specific payment arrangement.
Eight-digit account number field.
Roll number
Identifies a building society member’s particular account when required.
Often the reference field, according to provider instructions.
Account holder’s name
Helps identify the intended recipient and may be checked through Confirmation of Payee.
Payee name field.

What if the bank asks for a roll number?

If your bank or payment form has a roll-number field, consult the receiving building society’s instructions. Sometimes the roll number must go in the ordinary reference field rather than a dedicated roll-number box.

Do not enter the recipient’s entire longer account number into an eight-digit field by guessing which digits should be removed. One society may ask for the first eight digits, while another may ask for the last eight.

How to Pay Money Into a Building Society Account

Whether you are moving money from Halifax, Barclays, Lloyds, NatWest, Santander, Monzo, Starling or another UK banking provider, the process normally begins in the bank sending the funds.

Before starting, make sure the destination savings account is open, eligible to receive money and within any deposit or funding-window limits.

  1. Open your bank’s app or online banking. Sign in using the usual secure method.
  2. Choose Payments or Transfers. Select the option to pay a new person or account, where appropriate.
  3. Enter the recipient name. Use the name required by the building society’s current instructions.
  4. Enter the sort code. Copy the six-digit code from the official paying-in guidance.
  5. Enter the account number. Use the exact eight-digit destination number specified by the provider.
  6. Add the roll or reference number. Where required, copy it precisely into the correct reference field.
  7. Review Confirmation of Payee. If the account name does not match, investigate before proceeding.
  8. Enter the amount. Check the account’s deposit rules and your bank’s transfer limit.
  9. Confirm the payment. Authorise it only once all the details are correct.
  10. Save the transaction record. Keep the payment reference and check that the receiving account is credited.
For a large first payment: consider sending a small test amount where the provider permits it. First verify that the deposit arrives in the correct account before transferring a larger balance. A test payment does not replace checking the instructions or protect against every scam.

Confirmation of Payee: Why the Building Society Name May Not Match

Confirmation of Payee (CoP) is a name-checking service designed to reduce accidental payments and certain types of fraud. When you create a recipient, your bank may compare the name you entered against information associated with the destination account.

A mismatch does not always mean fraud. It may result from a spelling difference, joint-account details, the receiving society’s account structure or a recently opened account. But it must not be ignored without verification.

Exact matchThe name entered matches the details recognised by the receiving provider. Still check the amount and all other payment instructions.
Close matchThe service may recognise a similar name or suggest a correction. Verify that the recipient is the intended person.
No matchThe name does not match the checked account information. Stop and independently confirm the details.
Unable to checkThe service cannot complete the check. This is not proof that the details are safe or unsafe.

Nationwide example: a newly opened account

Nationwide’s savings guidance states that Confirmation of Payee may not be able to verify a newly opened savings account within its first 24 hours. It also explains that differences between the entered name and the name held on the account can cause a mismatch.

If the payment details are not recognised immediately, check the official account information and follow the receiving provider’s guidance before trying again.

Scam warning: do not proceed with a mismatched payee simply because somebody on the telephone says it is normal. Independently contact the receiving organisation using the official website or a trusted number.

What If You Used the Wrong Building Society Sort Code?

If a transfer has been sent with an incorrect sort code, account number or roll number, act promptly. The correct action depends on whether the payment was rejected, reached the wrong destination, or arrived at a shared receiving account without the reference needed to allocate it.

Problem
What might have happened
Next action
Incorrect sort code
The transfer could be rejected or directed to an unintended destination.
Contact the sending bank immediately and request a payment trace or recovery assistance.
Incorrect account number
The payment may fail or enter an unintended account if the details are otherwise valid.
Report the error to the sending bank as soon as possible.
Missing roll number
The receiving building society may be unable to identify the final customer account.
Contact the receiving society with the transfer date, amount and payment reference.
Wrong payment purpose
Savings and mortgage payments may use different receiving details.
Ask the provider to trace the payment and follow its correction instructions.
Unrecognised pending payment
Security review, processing or a receiving-account issue may be involved.
Check the sender’s payment status before sending the same amount again.

Steps to take after a mistake

  1. Open the original transaction in the sending bank’s app.
  2. Save the payment confirmation and note the amount, time, date and reference.
  3. Contact the sending bank promptly to report the error.
  4. If the problem is a missing building society reference, also contact the receiving society through its official support service.
  5. Provide the transaction details requested by the financial institutions.
  6. Ask whether a payment trace, recall or correction process is available.
  7. Keep the case or complaint reference and follow up until the outcome is confirmed.
Money recovery is not guaranteed. A bank transfer is different from a card purchase. Recovery may depend on where the money went and whether the recipient returns it. Contact the sending bank immediately rather than waiting to see whether the payment appears.

Using a Building Society Sort Code for Standing Orders

A standing order is a regular payment that you arrange through your bank. It can be useful when you want to move a fixed amount into savings each month.

The destination details are normally the same type of bank-transfer information: payee name, sort code, account number and a reference if required. However, your savings product must accept ongoing deposits.

Check before setting one up

  • Does the account accept standing orders?
  • Are there minimum or maximum monthly deposits?
  • Is the sort code still valid for the product?
  • Must the roll number be included every time?
  • Is the receiving account in your own name?

Common reasons for problems

  • A fixed-rate bond’s deposit window has closed.
  • A regular saver has a monthly contribution limit.
  • The payment reference is missing.
  • The account has matured or closed.
  • An old standing order points to outdated account details.
Direct Debit is different: a standing order is normally controlled by the person sending the money. A Direct Debit authorises an organisation to collect payments under an agreed mandate. Do not assume that payment details for one method automatically work for the other.

Can You Use a Building Society Sort Code for International Payments?

A six-digit UK sort code is not normally enough to send money from another country. International payment routes may use an International Bank Account Number (IBAN), a BIC or SWIFT identifier, correspondent banking details or other instructions supplied by the receiving provider.

Some UK building society savings accounts cannot accept certain types of international transfer at all. Even if an overseas bank allows you to enter a UK sort code, that does not establish that the receiving savings account can accept the payment.

UK bank transferUsually uses a sort code, account number, recipient name and any necessary reference.
IBANIdentifies an account for supported international payment arrangements.
BIC/SWIFTIdentifies a financial institution in supported international payment systems.
Correspondent detailsSome overseas payment routes may require intermediary institution information.

Before sending from overseas

  1. Check whether the UK building society accepts incoming international payments for that account.
  2. Ask which currencies and payment networks are supported.
  3. Obtain the official IBAN, BIC/SWIFT and any required reference.
  4. Confirm conversion fees, transfer charges and expected processing arrangements.
  5. Check whether the destination product has funding limits or tax-wrapper restrictions.
  6. Verify the details independently before sending a significant amount.
Never create an IBAN yourself from a building society sort code and account number. Use only the international banking details supplied or confirmed by the receiving financial institution.

Other Situations Where the Sort Code Matters

Salary payments

If you want your employer to pay into a building society account, check whether it accepts salary deposits and provides suitable direct receiving-account details.

Mortgage repayments

Use the mortgage-specific payment instructions. Do not assume your building society’s savings sort code is the right mortgage payment code.

Joint accounts

The account holder names may affect Confirmation of Payee. Use the account name format required by the provider.

Children’s savings

The account may have different deposit arrangements, funding restrictions or rules about who can pay in.

Cash ISA deposits

Check ISA subscription rules and the particular account’s deposit permissions. An ordinary bank transfer is not automatically an ISA transfer between providers.

Closed or matured accounts

Do not reuse old payment details without checking that the destination account remains open and accepts deposits.

Is a Sort Code Enough to Identify a Building Society Account?

No. A sort code can indicate a payment-routing institution or arrangement, but it does not by itself identify an individual customer’s savings or current account.

Some building societies use payment arrangements operated through another bank. A sort-code checker may therefore show a bank name that is different from the building society name you expected.

For example, Yorkshire Building Society says its published incoming-payment sort code is operated through NatWest Bank plc. That arrangement does not automatically make the payment instructions incorrect. What matters is whether the details match the receiving society’s current official guidance.

Verification rule: a sort-code lookup can help identify a payment-routing arrangement, but the receiving institution’s official paying-in instructions are the authoritative source for the account number and any roll/reference requirement.

Before Sending Money: Final Sort Code Checklist

A short check can prevent an avoidable payment problem, particularly where a building society uses shared receiving-account details.

I have identified the correct building society.
I am using instructions for the exact account type.
The six-digit sort code came from an official source.
The eight-digit payment account number is correct.
I have entered the roll number if required.
The payee name matches the provider’s instructions.
I have checked any Confirmation of Payee warning.
The savings or mortgage account can accept the payment.
The amount is within any applicable account limits.
I have independently verified any recently changed details.
Changed payment details? If you receive an unexpected email or telephone call saying that a building society’s sort code has changed, do not immediately transfer money to the replacement details. Verify the change with the provider through a trusted official channel.

Related UK Building Society Guides

These independent guides provide more information about individual providers. Always obtain current sort codes and receiving-account instructions from the actual building society.

Official UK Sources Used in This Guide

These provider and independent consumer-information resources explain the payment arrangements discussed above. Check the live pages before making a transfer.

Accuracy, Privacy and Payment Safety Notice

Building-Society.org is an independent information website. It is not affiliated with the building societies mentioned and cannot confirm an individual account’s payment details, accept deposits, trace transfers, recover payments or access customer accounts.

The sort codes and payment examples in this guide are drawn from published provider instructions, but individual accounts, product types and payment arrangements can differ. Always verify account-specific details with the receiving building society before transferring funds.

Never publish private banking information: do not submit your full account number, roll number, payment security code, online banking password or complete transaction details in public comments or unofficial support forms. Share sensitive information only through your provider’s approved secure channels.

Last editorial review: 24 October 2026. This guide uses British English and UK domestic payment terminology. Provider instructions and banking arrangements may change after review.

Building Society Sort Code FAQs

1. What is a building society sort code?

A building society sort code is a six-digit UK payment-routing number. It is usually used together with an eight-digit account number and, where required, a building society roll or payment reference.

2. How do I find my building society sort code?

Check your official app, online banking account details, statement or the provider’s paying-in instructions. For accounts using a shared receiving arrangement, follow the specific sort-code, account-number and reference instructions published by the society.

3. Is a building society roll number the same as a sort code?

No. A sort code is six digits used for payment routing. A roll number is an additional identifier used by some building societies to identify a customer’s particular account.

4. What is the Yorkshire Building Society sort code?

Yorkshire Building Society’s published incoming-payment instructions list 60-92-04, with the first eight digits of the customer’s ten-digit YBS account number used as the payment account number and the full ten-digit number entered as the reference or roll number. Verify the details for your account before paying.

5. What is the Coventry Building Society sort code?

Coventry Building Society’s published Online Services paying-in guidance lists 40-63-01. It instructs customers to use the last eight digits of their account number, with their full name as the payee. Follow the current official instructions for your account.

6. What is the Skipton Building Society sort code?

Skipton Building Society’s published savings payment instructions list sort code 20-78-91 and account number 70798924, with the customer’s own nine-digit Skipton account number used as the reference. These details must be checked against the current instructions for the relevant product.

7. What is the Leeds Building Society sort code?

Leeds Building Society currently publishes 08-61-19 for savings payments and 40-64-38 for mortgage payments. Use the correct account and reference instructions for the relevant product.

8. Does Nationwide have one sort code for every account?

No. Nationwide provides account-specific sort codes for normal current accounts and many savings products. Customers can find their details in the official app, Internet Bank or account statements. Other products may have separate payment instructions.

9. Where do I enter a building society roll number?

A building society roll number commonly goes in the payment reference field, but you must check the receiving society’s instructions. Do not put it into another field unless instructed to do so.

10. Why does my bank say the building society account name does not match?

Confirmation of Payee may show a mismatch because of incorrect details, a name variation, joint-account arrangements, a recently opened account or the receiving account structure. Verify the payee through official channels before continuing.

11. What happens if I forget the roll number on a transfer?

If the receiving arrangement requires a roll number, the building society may be unable to allocate the payment correctly. Contact the receiving institution and sending bank with the transaction details so they can investigate.

12. Can I use a building society sort code for an international transfer?

A UK sort code alone is generally insufficient for an international payment. The receiving provider may require an IBAN, BIC/SWIFT or other information, and some accounts may not accept international transfers.

13. Can I use a building society sort code for a standing order?

Yes, where the account accepts standing-order deposits. Use the required sort code, account number and any roll or reference number, and check that the savings product permits regular payments.

14. What should I do if I send money to the wrong sort code?

Contact the sending bank immediately and report the mistake. Ask about tracing or recovering the payment. Keep your transaction confirmation and contact the receiving society as well when a missing reference or account-allocation issue may be involved.

15. Is Building-Society.org an official sort code verification service?

No. Building-Society.org is an independent information website. It cannot validate individual account details or process transfers. Verify payment instructions through the relevant building society’s official services.

Leave a Comment